Epson SC-F2000 Service Manual page 186

SC-F2000
3.4.6.13 TF TIMING BELT
A D J U S T M E N T When replacing this part, refer to
R E Q U I R E D
the Order by Repaired Part" (p194)
specified operations including required adjustment.
1. Remove the REAR COVER SUB ASSY.
2. Remove the TF ENCODER BOARD ASSY.
3. Loosen the two screws, and loosen the tension of the TF TIMING BELT.
4. Remove the TF TIMING BELT.
TF TIMING BELT
Figure 3-152. Removing the TF TIMING BELT
DISASSEMBLY & ASSEMBLY
"4.1.2 Adjustment Items and
and make sure to perform the
(p77)
(p183)
Screw
Screw
Disassembly and Assembly Procedure
Revision C
186
Confidential