Epson SC-F2000 Service Manual page 96

SC-F2000
11. Disconnect cables and FFCs from the MAIN BOARD.
C H E C K
No need to disconnect the FFCs and cable connected to the
P O I N T
following connectors:
•
CN200
•
CN201
•
CN300
•
CN301
•
CN400
•
CN500
CN301
MAIN BOARD
12. Remove the six screws, and remove the MAIN BOARD.
B) Silver M3x8 Bind machine screw: 5 pcs
C) Silver M3x4 Bind machine screw: 1 pcs
13. Disconnect the cable and FFCs from the connectors (CN200, CN201, CN300,
CN301, CN400, CN500).
DISASSEMBLY & ASSEMBLY
CN400
CN200
CN201
CN500
CN300
Disassembly and Assembly Procedure
When installing a new MAIN BOARD to the printer, first connect
the FFCs and cable to the connectors (CN200, CN201, CN300,
CN301, CN400, CN500), then install the MAIN BOARD to the
printer.
MAIN BOARD
B
B
B
Figure 3-42. Removing the MAIN BOARD
Revision C
B
B
C
96
Confidential