Epson SC-F2000 Service Manual page 295

SC-F2000
[Lubrication 3]
Part Name OIL PAD HOLDER (Left/Right)
1. G-84 (1516265)
Lubricants (Part Code)
2. O-17 (1521154)
1. 0.3g
Amount
2. 0.09 cc
φ 2 mm injector
Lubrication Tool
Remove the OIL PAD HOLDER.
Lubrication Manner 1. Apply the lubricant with a syringe.
2. Let the oil soak into the oil pad.
Note Be careful not to apply the lubricant beyond the specified point.
OIL PAD HOLDER
Oil pad
Lubrication Point 2
MAINTENANCE
[Lubrication 4]
Part Name
Lubricants (Part Code) G-84 (1516265)
Amount
Lubrication Tool
Lubrication Manner
Note
Lubrication Point 1
Lubrication
CR Main Shaft
φ 2 mm × 8 mm × 5 points
φ 2 mm injector
Lubricate on the midpoint of the posts, then spread the lubricant entirely
with a waste cloth.
Be careful not to apply the lubricant beyond the specified point.
Lubrication Points
CR Main Shaft
Revision C
295
Confidential