Epson SC-F2000 Service Manual page 189

SC-F2000
3.4.7.2 BOARD BOX FAN 2
1. Remove the PRINTER COVER.
2. Remove the RIGHT HOUSING PLATE.
3. Remove the RIGHT COVER ASSY.
4. Remove the LEFT HOUSING PLATE.
5. Remove the LEFT COVER ASSY.
6. Remove the REAR COVER SUB ASSY.
7. Remove the REAR COVER. (p79)
8. Remove the SUB-B BOARD. (p98)
9. Remove the MAIN BOARD. (p95)
10. Disconnect the cable from the connector (CN11) of the MAIN BOARD.
11. Remove the two screws, and remove the BOARD BOX FAN 2.
A) Silver M3x14 Bind machine screw: 2 pcs
Install the BOARD BOX FAN 2 so that the Label comes to the
inside. (See Figure 3-155)
DISASSEMBLY & ASSEMBLY
(p72)
(p74)
(p88)
(p73)
(p86)
(p77)
Disassembly and Assembly Procedure
BOARD BOX FAN 2
A
A
Figure 3-155. Removing the BOARD BOX FAN 2
Revision C
189
Confidential