Used Operation Liquids And Fillings - Amount; Zetor Service Fillings; Motor Oils; Specification Of Oil For Tractor Transmission Devices - Zetor MAJOR HS Series Operator's Manual

Used operation liquids and fillings - amount

Determination name
Brake fluid
Cooling liquid
Cooling liquid with cabin
Oil in engine
Oil for housing of front driving axle
Oil for planet reductors of front driving axle
Oil for gearbox and final drive housing
Fuel
Oil for gearbox of front PTO shaft
* - For tractor work at slope, the filling must be increased by another 4-8 litres of oil. This is also valid in the
case of an aggregation with machines connected to the outer hydraulic circuit.
The manufacturer does not take responsibility for any damages caused by the usage of
service fillings that do not comply with requirements stated in this service manual.

ZETOR service fillings

To maintain best operational characteristics of your tractor, original operational Zetor fillings are
recommended to be used.
Oil for gearing mechanisms of tractors ZETOR EXTRA 10W30 STOU
Oil for front driving axle of ZETOR LS 80W

Motor oils

While changing or refilling the oil fill in the engine always use an oil complying with the specification
DQC III-10 LA

Specification of oil for tractor transmission devices

Viscosity Class SAE Performance Class API
10W - 30

Specification of oil for the front driving axle

Viscosity class SAE
80W
80W-90
10W - 30
Use oils with additives for the limited slip differential.

Other recommended service fillings tested on Zetor tractors

Oil to gear systems of tractors

Manufacturer
Paramo
Aral
ÖMV
Fuchs
TRACTOR MAINTENANCE
GL-4
Performance class API
GL-4 / GL-5
Oil labelling
Traktol STOU
Super Traktoral
Austrotrac
AGRIFARM STOU 10W-30 MC
amount in litres
0.5
12
8
5.5
2x0.6
35*
80
2.7
Viscosity class
SAE
10W - 30
10W - 30
10W - 30
10W - 30
104
Performance
class API
GL-4
GL-4
GL-4
GL-4