Fuels, coolants and lubricants used - amounts
No.
Filling point
MODEL
1
Radiator
2
Engine
3
Transmission case
4
Front axle
5
Final drive case(B)
6
Clutch pedal shaft
7
Ball joint
8
Fuel tank
The manufacturer does not take responsibility for any damages caused by the usage of
service fillings that do not comply with requirements stated in this service manual.
Recommended ZETOR service fillings
Engine - ZETOR 10W-40 L-SAPS
Transmission - ZETOR EXTRA 10W-30 STOU (hydraulic gearboxes, summer operation)
- ZETOR HM 32 (winter operation)
Front axle - ZETOR LS 80W
Plastic lubricant - MOGUL LA 2
MAINTENANCE
Fillings
50/50 : Ethylene glycol/Water (L.L.C)
ASTM D4985 / D6210
API : Grade CJ-4 (API ACEA E-6,
JASO PH-2, Grade 10W30)
API GL-4 Grade
Tractor transmission and hydraulic oil
Below: -20 °C (-4 °F) ISO VG32
Above -20 °C (-4 °F) ISO VG46
(API GL-4 Grade) SAE 80W/90
Grease
Grease
Diesel fuel (EN 590)
Quantity liter (gal.)
UTILIX CL45/55
9,3 l (2,5 US gal)
5,3 l (1,4 gal)
35 l (9,24 US gal)
10 l (2,64 US gal)
As required
As required
60 l (15,85 US gal)
83