Table of Contents
Advertisement
8 SCOPES AND DEFINITIONS OF PROGRAMMABLE PARAMETERS
8.1 CONTENTS AND SCOPES OF PARAMETERS
No.
Items
DC Generator
1
Work Mode
2
Rated Voltage
3
Loading Voltage
4
PT Ratio
5
Rated Current
6
CT Ratio
7
Rated Power
Over Voltage
8
Shutdown
Under Voltage
9
Shutdown
Over Voltage
10
Warn
HGM8110DC-2 Genset Controller
HGM8110DC-2 GENSET CONTROLLER USER MANUAL
Table 13 - Parameters Contents and Scopes
Parameters
Defaults
(0~2)
0
(10~30000)V
500
(0-100)%
90
(10-30000)V/10V
1000
(10-6000)A
300
(10-6000)A/20mA 400
(10-6000)kW
100
0: Disable
1
1: Enable
(0-200)%
120
(0-3600)s
1
0: Disable
1
1: Enable
(0-200)%
80
(0-3600)s
1
0: Disable
1
1: Enable
(0-200)%
110
2020-02-20
Description
0: DC;
1: AC;
2: DC+AC;
Standard for checking DC generator
over/under voltage.
Setting value is DC generator rated
voltage's percentage. The controller
detects in the preparation of the load
period, and does not enter the normal
running period when the generator voltage
is less than the load voltage.
Ratio of the external connected DC voltage
transformer.
Rated full load current of DC generator,
which is used as the standard for load
power.
Ratio of the external connected DC current
transformer.
It is rated power for DC generator, which is
used as the standard for load power.
Alarm is detected after enabled; not
detected if it is disabled.
Set value is DC generator rated voltage's
percentage, alarm starts if it is above the
set value.
Alarm starts when voltage gets up to the
alarm value and this delay is expired.
Alarm is detected after enabled; not
detected if it is disabled.
Set value is DC generator rated voltage's
percentage, alarm starts if it is below the
set value.
Alarm starts when voltage gets up to the
alarm value and this delay is expired.
Alarm is detected after enabled; not
detected if it is disabled.
Set value is DC generator rated voltage's
percentage, alarm starts if it is above the
Version 1.0
Page 30 of 69
Advertisement
Table of Contents
