Smartgen HGM8110DC-2 User Manual page 37

No. Items
15 Under Freq. Warn
16 Loss of Phase
Phase Sequence
17
Wrong
AC Load
Current
1
Transform
2 Rated Current
3 Rated Power
4 Over Current
HGM8110DC-2 Genset Controller
HGM8110DC-2 GENSET CONTROLLER USER MANUAL
Parameters Defaults
(0~200)% 108
(0-3600)s 5
0: Disable
1
1: Enable
(0-200)% 84
(0-200)% 86
(0-3600)s 5
(0~1) 1
(0~1) 1
(5~6000)A/5A 500
(5~6000)A 500
(0~6000)kW 276
0: Disable
1
1: Enable
(0~200)% 120
0: Warn
1: Shutdown
0
2: Trip and Stop
3: Trip
Type: Definite
Definite
Time;
Time
IDMT
(0-3600)s 10
2020-02-20
Description
this value.
Set value is percentage of AC Gen rated
freq. when alarm is active, and freq. is
below return value, alarm can be cleared
automatically.
Alarm starts when freq. reaches alarm
value and this delay time is expired.
Start to detect alarms when it is enabled;
not detect alarms when disabled;
Set value is percentage of AC Gen rated
freq. start alarm handle when it is below
this value.
Set value is percentage of AC Gen rated
freq. when alarm is active, and freq. is
above return value, alarm can be cleared
automatically.
Alarm starts when freq. reaches alarm
value and this delay time is expired.
0: Disable 1: Enable
The ratio of external CT
Generator's rated current, standard of load
current.
Generator's rated power, standard of load
power.
Start to detect alarms when it is enabled;
not detect alarms when disabled;
Set value is percentage of AC Gen rated
full load current; Delay value can be set to
Definite Time or IDMT; Start alarm handle
when it is above this value.
Alarm type can be selected; when alarm is
active, it will start alarm handle according
to the selected alarm type.
If Definite Time is set, then do alarm delay
handle by setting fixed delay time;
If IDMT is set, then do alarm delay handle
by setting multiplier;
After Definite Time is active, realize alarm
delay by setting this value.
Version 1.0 Page 37 of 69