Operation; Key Function - Smartgen HGM8110DC-2 User Manual

5 OPERATION

5.1 KEY FUNCTION

Icon
Stop/Reset
Start
Manual Mode
Auto Mode
Alarm Mute
Close
Open
Set
Up/Increase
Down/Decrease
Left
Right
HGM8110DC-2 Genset Controller
HGM8110DC-2 GENSET CONTROLLER USER MANUAL
Table 5 - Key Description
Key
Stop running generator in Auto/Manual mode;
Reset alarms in stop mode;
Press for over 3s to test whether panel indicators are normal
(lamp test);
During stopping process, press this button again to stop
generator immediately.
Start genset in Manual mode.
Press this key and put controller in Manual mode.
Press this key and put controller in Auto mode.
Remove alarm sound;
If there is trip alarm, pressing the button at least 3 seconds can
reset this alarm.
Control breaker to close in manual mode;
Control breaker to open in manual mode;
Enter setting interface;
1) Screen scroll;
2) Move up cursor and increase value in setting menu.
1) Screen scroll;
2) Move down cursor and decrease value in setting menu.
1. Page scroll;
2. Left move cursor in setting menu.
1. Page scroll;
2. Right move cursor in setting menu.
2020-02-20
Description
Version 1.0 Page 12 of 69