[:Sense]:Correction:collect:info:status; [:Sense]:Correction:collect:initialize; [:Sense]:Correction:collect:load; [:Sense]:Correction:collect:open - Anritsu Site Master S331L Scpi Programming Manual

[:SENSe]:CORRection:COLLect:INFO:STATus?

Query Description: Query returns 0 if calibration is not in progress, 1 if calibration is in
Example: To query calibration progress status:

[:SENSe]:CORRection:COLLect:INITialize

Cmd Description: Command to initialize an RF calibration with the current calibration
Example: To initialize RF calibration:

[:SENSe]:CORRection:COLLect:LOAD

Cmd Description: Perform 'Load' step of calibration.
Example: To measure load:

[:SENSe]:CORRection:COLLect:OPEN

Cmd Description: Perform 'Open' step of calibration.
Example: To measure open:

[:SENSe]:CORRection:COLLect:SAVe

Cmd Description: Complete an RF Cal and perform coefficient calculation.
Example: To complete a RF calibration and perform coefficient calculation:

[:SENSe]:CORRection:COLLect:SHORt

Cmd Description: Perform 'Short' step of calibration.
Example: To measure short:
4-24
Chapter 4 — Cable & Antenna Analyzer Mode Commands
progress, 2 if calibration was aborted, 3 if cal-coefficients are being
calculated, or 4 if calibration has completed.
:CORR:COLL:INFO:STAT?
type.
:CORR:COLL:INIT
:CORR:COLL:LOAD
:CORR:COLL:OPEN
:CORR:COLL:SAV
:CORR:COLL:SHOR
PN: 10580-00322 Rev. F S331L PM