Calculate:transform:distance:start <Distance>{ M|Cm|Mm,Ft; Calculate:transform:distance:start; Calculate:transform:distance:stop <Distance>{ M|Cm|Mm,Ft; Calculate:transform:distance:stop - Anritsu Site Master S331L Scpi Programming Manual

:CALCulate:TRANsform:DISTance:STARt <distance>{ m|cm|mm,ft}

:CALCulate:TRANsform:DISTance:STARt?

Cmd Description: Command sets the start distance. Verify the appropriate unit is used.
Query Description: Query returns the start distance in the current units.
Param Type: Float
Param Description: Distance
Default Units: m(meter)
Example: To set start distance to 1 m:
:CALCulate:TRANsform:DISTance:STOP <distance>{ m|cm|mm,ft}

:CALCulate:TRANsform:DISTance:STOP?

Cmd Description: Command sets the stop distance. Verify the appropriate unit is used.
Query Description: Query returns the stop distance in the current units.
Param Type: Float
Param Description: Distance
Default Units: m(meter)
Example: To set stop distance to 2 m:

:CALCulate:TRANsform:DISTance:UNIT METers|FEET

:CALCulate:TRANsform:DISTance:UNIT?

Cmd Description: Command sets the distance unit.
Query Description: Query returns the current distance units.
Param Range: METers|FEET
Default Value: METers
Example: To set distance unit to feet:
4-16
Chapter 4 — Cable & Antenna Analyzer Mode Commands
:CALC:TRAN:DIST:STAR 1
:CALC:TRAN:DIST:STOP 2 M
:CALC:TRAN:DIST:UNIT FEET
PN: 10580-00322 Rev. F S331L PM