Calculate:transform:distance:cabloss <Cable-Loss>{ Db/M,Db/Ft; Calculate:transform:distance:cabloss; Calculate:transform:distance:dmax; Calculate:transform:distance:pvelocity <Propagation-Velocity - Anritsu Site Master S331L Scpi Programming Manual

Chapter 4 — Cable & Antenna Analyzer Mode Commands
:CALCulate:TRANsform:DISTance:CABLoss <cable-loss>{
dB/m,dB/ft}

:CALCulate:TRANsform:DISTance:CABLoss?

Cmd Description: Command sets the cable loss. Verify that the appropriate unit is used.
Query Description: Query returns the cable loss based on the current units.
Param Type: Float
Default Value: 0
Default Units: dB/m
Example: To set cable loss to 2:

:CALCulate:TRANsform:DISTance:DMAX?

Query Description: Query returns max distance in the current units.
Example: To query max distance:

:CALCulate:TRANsform:DISTance:PVELocity

<propagation-velocity>
:CALCulate:TRANsform:DISTance:PVELocity?
Cmd Description: Command sets the propagation velocity.
Query Description: Query returns the propagation velocity.
Param Type: Float
Default Value: 1
Example: To set propagation velocity to 0.05:

:CALCulate:TRANsform:DISTance:RESolution?

Query Description: Query returns distance resolution in the current units for reflection.
Example: To query distance resolution:
S331L PM
:CALC:TRAN:DIST:CABL 2
:CALC:TRAN:DIST:DMAX?
:CALC:TRAN:DIST:PVEL 0.05
:CALC:TRAN:DIST:RESolution?
PN: 10580-00322 Rev. F 4-15