Mmemory:store:trace <Integer>,<"Filename; Program:ett:abortscript; Program:ett:loadscript <"Filename; Program:ett:nextstep - Anritsu Site Master S331L Scpi Programming Manual

:MMEMory:STORe:TRACe <integer>,<"filename">
Cmd Description: Stores the trace data and settings into a file with specified type.
Param Type: Integer, String
Param Description: Param1: An integer representing the file type where 1 or 0 :
Example: To save a measurement (include directory path, do not include

:PROGram:ETT:ABORtscript

Cmd Description: Command exits easy-test mode.
Example: To abort ETT mode:
:PROGram:ETT:LOADscript <"filename">
Cmd Description: Command begins easy-test mode with the given filename.
Param Description: Filename with .ett extension
Example: To enter ETT mode:

:PROGram:ETT:NEXTstep

Cmd Description: Command performs the next step while in easy-test mode.
Example: To proceed to the next step in ETT mode:

:PROGram:ETT:STATe?

Example: To get the ETT state:

:SYSTem:CODeload

Cmd Description: Command performs a firmware update from a USB drive.
Example: To initiate a firmware update:
3-6
Measurement file (default), 5: Text (only valid in CAA), 6: CSV (only
valid in CAA), Param2: Filepath without extension.
extension):
:MMEM:STOR:TRAC 0, "/internal/temp"
:PROG:ETT:ABOR
:PROG:ETT:LOAD "/internal/my-test.ett"
:PROG:ETT:NEXT
:PROG:ETT:STAT?
:SYST:COD
PN: 10580-00322 Rev. F
Chapter 3 — All Mode Commands
S331L PM