[:Sense]:Base:net:manual:gateway <"Default-Gateway; [:Sense]:Base:net:manual:gateway; [:Sense]:Base:net:manual:ip <"Ip-Address; [:Sense]:Base:net:manual:ip - Anritsu Site Master S331L Scpi Programming Manual

Handheld cable and antenna analyzer
Hide thumbs Also See for Site Master S331L:
Table of Contents

Advertisement

[:SENSe]:BASe:NET:MANual:GATEway <"Default-Gateway">

[:SENSe]:BASe:NET:MANual:GATEway?

Cmd Description: Command sets the static Gateway.
Query Description: Query returns the static Gateway in string format.
Param Type: String
Param Description: Default Gateway
Example: To set static Gateway:
[:SENSe]:BASe:NET:MANual:IP <"IP-address">

[:SENSe]:BASe:NET:MANual:IP?

Cmd Description: Command sets the static IP address.
Query Description: Query returns the static IP address in string format.
Param Type: String
Param Description: IP address
Example: To set static IP address:
[:SENSe]:BASe:NET:MANual:SUBnet <"Subnet-Mask">

[:SENSe]:BASe:NET:MANual:SUBnet?

Cmd Description: Command sets the static Subnet Mask.
Query Description: Query returns the static Subnet Mask in string format.
Param Type: String
Param Description: Subnet Mask
Example: To set static Subnet Mask:

[:SENSe]:BASe:NET:MODE MANual|DHCP

[:SENSe]:BASe:NET:MODE?

Cmd Description: Command sets the Ethernet configuration to DHCP or static (manual).
Query Description: Query returns the Ethernet configuration.
Param Type: Character
Param Description: MANual|DHCP
Example: To set the Ethernet configuration to static (manual):
3-8
:BAS:NET:MAN:GATE "192.35.101.1"
:BAS:NET:MAN:IP "192.35.100.1"
:BAS:NET:MAN:SUB "255.255.252.0"
:BAS:NET:MODE MAN
PN: 10580-00322 Rev. F
Chapter 3 — All Mode Commands
S331L PM

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Site Master S331L and is the answer not in the manual?

Table of Contents