Ethernet Connectivity - Anritsu Site Master S331L Scpi Programming Manual

Handheld cable and antenna analyzer

Hide thumbs Also See for Site Master S331L:

Table of Contents

Chapter 1 — General Information

Ethernet Connectivity

1. On the PC, run NI Measurement & Automation Explorer or VISA Interactive Control

and create a new LAN Resource under Network Devices. Add the TCP/IP resource

using a Manual Entry of Raw Socket, as shown in the example below.

Figure 1-7.

NI VISA Interactive Control LAN Resource Addition Using Raw Socket

S331L PM

PN: 10580-00322 Rev. F

1-4 Sending SCPI Commands

1-9

Table of Contents

Table of Contents

Do you have a question about the Site Master S331L and is the answer not in the manual?