Instrument:catalog:full; Instrument:nselect <Application-Mode-Number; Instrument:nselect; Instrument:select <"Mode-Identifier - Anritsu Site Master S331L Scpi Programming Manual

:INSTrument:CATalog:FULL?

Query Description: Queries the available modes. 'CAA'2 for Advanced Cable Antenna
Example: To query available application modes:
:INSTrument:NSELect <application-mode-number>

:INSTrument:NSELect?

Cmd Description: Command sets the required application mode.
Query Description: Query returns which mode is currently selected. 2 for Advanced Cable
Param Type: Integer
Param Description: Application Mode
Param Range: 2|6|10|201|202
Example: To set current application mode to Hi Accuracy Power Meter:
:INSTrument:SELect <"mode-identifier">

:INSTrument:SELect?

Cmd Description: Command sets the required application mode.
Query Description: Query returns which mode is currently selected. "CAA" for Advanced
Param Type: String
Param Description: Application mode identifier
Param Range: "CAA"|"Power Meter"|"HI_PM"|"cCAA"|"VIP"
Example: To set current application mode to Hi Accuracy Power Meter:
:MMEMory:DELete <"filename">
Cmd Description: Delete setup(.stp) or measurement(.dat) file.
Param Type: String
Param Description: Filepath with extension
Example: To delete a setup:
3-4
Analyzer mode, 'Power Meter'6 for Power Meter, 'HI_PM'10 for High
Accuracy Power Meter, 'cCAA'201 for Classic Cable Antenna Analyzer
mode, 'VIP'202 for Visual Inspection Probe
:INST:CAT:FULL?
Antenna Analyzer mode, 6 for Power Meter,10 for High Accuracy Power
Meter, 201 for Classic Cable Antenna Analyzer mode, 202 for Visual
Inspection Probe.
:INST:NSEL 10
Cable Antenna Analyzer mode, "Power Meter" for Power Meter,
"HI_PM" for High Accuracy Power Meter, "cCAA" for Classic Cable
Antenna Analyzer mode, "VIP" for Visual Inspection Probe
:INST:SEL "HI_PM"
:MMEM:DEL "/internal/temp.stp"
PN: 10580-00322 Rev. F
Chapter 3 — All Mode Commands
S331L PM