System:mbtemperature; System:options; System:preset; [:Sense]:Base:brightness <Brightness-Level - Anritsu Site Master S331L Scpi Programming Manual

Handheld cable and antenna analyzer
Hide thumbs Also See for Site Master S331L:
Table of Contents

Advertisement

Chapter 3 — All Mode Commands

:SYSTem:MBTemperature?

Query Description: Query returns motherboard temperature in degree C.
Example: To query motherboard temperature:

:SYSTem:OPTions?

Query Description: Query returns option string delimited by "/".
Example: To query full option string:

:SYSTem:PRESet

Cmd Description: Presets the application to its default state. Use *OPC? to block till
Example: To perform preset:
[:SENSe]:BASe:BRIGhtness <brightness-level>

[:SENSe]:BASe:BRIGhtness?

Cmd Description: Command sets the brightness level.
Query Description: Query returns the brightness level.
Param Type: Integer
Param Range: 0 to 10 in increments of 1, where 0 is 0% and 10 is 100% brightness
Default Value: 10
Example: To set brightness to 5:

[:SENSe]:BASe:IPaddress?

Query Description: Query returns the IP address in a special format. Return value
Example: To query IP address:
S331L PM
:SYST:MBT?
:SYST:OPT?
preset is complete.
:SYST:PRES
setting.
:BAS:BRIG 5
example: 2887436918 (to recover the actual IP address of
172.26.202.118, you need to convert the returned value to hex
AC1ACA76 and then take the resulting 4 numbers (2 characters each,
in hex) and convert them back to decimal.
:BAS:IP?
PN: 10580-00322 Rev. F
3-7

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Site Master S331L and is the answer not in the manual?

Table of Contents