Part 5 Printing From Autocad; Printing From Autocad (Release 14) - Kyocera KM-4850w Operation Manual

Section 1 Printing from AutoCAD
1-1

Printing from AutoCAD (Release 14)

The following uses the AutoCAD (Release 14) CAD (Computer-Aided Design) application from Autodesk,
Ltd. of the United States as an example in explaining the procedure for performing print settings.
Print Settings in AutoCAD
Perform the following procedure to make print settings in AutoCAD.
1 Copy the [plkm43.dll] driver file that is on the accessory CD-ROM into the [Drv] folder of your
AutoCAD application.
• The AutoCAD [Drv] folder is normally located under: C:\ProgramFiles\AutoCAD R14\Drv
• The [plkm43.dll] driver file can be found under: D:\Drivers\English\Wide\AutoCAD\R14\plkm43.dll
("D" = Your CD-ROM drive)
2 Run AutoCAD and select [Print] in the [File] menu of that application. Then click on the [New...] button
in the resulting dialog box (shown below).
Page 5-2