Kyocera KM-4850w Operation Manual page 165

[Edge Adjustment] settings: Determine the amount of margin space that will be added to the leading and
trailing edge of the paper.
NOTE
If you enter values here, the length of the printed paper will be increased by the total length of the
margin spaces selected.
[Negative] checkbox: Put a check mark in this checkbox when you want to make a negative print (such as
with negative film where blacks and whites are inverted.)
NOTE
Normally, the area of a printed page that remains white is greater than that which is actually printed
on. Thus, you should understand that when you select [Negative] for any document other than an
actual negative graphic, the areas that are normally white will be printed as black and toner usage will
be increased.
[Mirror] checkbox: Put a check mark in this checkbox when you want to make a mirror print where left and
right are inverted.
[Whole] radio buttons: Select whether or not you want to add a margin space to the leading and trailing
edge of the paper.
NOTE
If you turn the [Whole] setting "On", the length of the printed paper will be increased by the total
length of the margin spaces entered for the [Edge Adjustment] settings.
Page 4-59