Kyocera KM-4850w Operation Manual page 181

Transmit the HP-GL/2 data file.
ftp> put sample.plt
200 PORT command successful.
150 Opening BINARY mode data connection for sample.plt.
226 Transfer complete.
ftp: 175 bytes sent in 0.00Seconds 175000.00Kbytes/sec.
Once file transfer is complete, end the FTP session with a "quit" command.
ftp> quit
4 A short time after the file has been transmitted using FTP, the uploaded file will be displayed in the
[Waiting] job list under the Web Manager's [Spooling] screen.
5 If printing is accomplished correctly, the procedure is complete. In the case that, for example, printing
ends without anything actually being printed out, check the content of the error that will be listed
under the [AutoPrint Log] in the [Log] screen and try to print again.
Page 5-12