Kyocera KM-4850w Operation Manual page 152

[Network Setting] button
Click on this button when you want to change network settings.
Anytime you change the current default settings, be sure to click on the [Enter] button to register those
changes.
[Identification] settings: Enter the desired name for the copier with CAD Master Controller installed under
the [Computer Name] field. In order to avoid possible problems, be sure to use a name other than one
already registered to another device on the same network.
NOTES
Be sure to register the same name under both the [Computer Name] field and the [Host Name] field
(under the [DNS] settings).
Page 4-46