Kyocera KM-4850w Operation Manual page 166

[Auto Rotation] radio buttons: Select whether or not you want to have the printed image automatically
rotated, as necessary, to fit onto the orientation of the presently set paper.
NOTE
If you want to use the [Linear Measure Adjustment] settings, turn [Auto Rotate] "OFF".
[Linear Measure Adjustment] can be set using the Web Manager interface.
[Image Placement] radio buttons: Select the basic location of the printed image on the paper. If you select
"Origin", the location of the image will be based on its relation to the lower left corner of the paper.
If you select "Center" the image will be centered on the paper.
NOTE
This setting is only applicable to HP-GL, HP-GL/2 and HP-RLT file formats. When printing other file
formats, even if you select "Origin", the printed image will be centered on the paper.
[Unit] radio buttons: Select the desired unit of measure, either "mm" or "inch".
[Installation Option] setting: Be sure to put a check mark in the [Optional Cassette] checkbox when the
optional Drawer 1 is installed in the copier-printer. If this box is not marked, you will not be able to
select Drawer 1 for printing.
[CGM Filter] setting:Be sure to put a check mark in the [CGM Filter] checkbox when the optional [CGM
Filter] is registered. If it is not registered, you will not be able to print the CGM File format.
[DGN Filter] setting:Be sure to put a check mark in the [DGN Filter] checkbox when the optional [DGN
Filter] is registered. If it is not registered, you will not be able to print the DGN File format.
Page 4-60