Kyocera KM-4850w Operation Manual page 48

[Draft Mode] setting: Turn this setting "ON" when you want to print in the draft mode (toner-saving mode).
[Auto Rotate] setting: Turn this setting "ON" when you want to have the printed image automatically
rotated, as necessary, to fit onto the orientation of the presently set paper.
NOTES
• If you want to use the [Linear Measure Adjustment] settings, turn [Auto Rotate] "OFF".
[Linear Measure Adjustment] can be set using the Web Manager interface.
• If even spacing of black or white lines appear, turn [Auto Rotate] "ON".
[Whole] setting: Turn this setting "ON" when you want to increase the printing area of the paper and add a
margin space to the leading and trailing edge of the paper.
NOTE
If you turn the [Whole] setting "ON", the length of the printed paper will be increased by the total
length of the margin spaces selected.
[Media] setting: Selection of the desired paper type is possible from among "Plain", "Vellum", "Film",
"Custom" and "Printer Default".
NOTES
• Be sure to turn the [Paper working] setting "ON" in your copier. For more information, refer to the
Operation Guide for the copier.
• If you have designated a location for paper feed in the [Page Source] field under the [Paper/
Quality] Tab ("Page Setup" in Windows NT 4.0), the setting made here will not be used and paper
will be fed from the designated location regardless of the paper type loaded in that drawer.
Page 1-44