Kyocera KM-4850w Operation Manual page 81

2 Click on [...] to the right of the [Folder] field in order to select the new folder that you want to use as a
destination folder for receiving scanned data. The [Select Folder] dialog box will open.
* You may also select the desired folder by typing the path for that folder directly into the [Folder]
field.
A list of all of the folders available on the available hard disk(s) will be displayed in the [Select Folder]
dialog box. Select the folder that you want to designate as a destination folder for receiving scanned data
and click on [OK].
* You WILL be able to switch among available drives, but you will NOT be able to select any removable
drive such as a Floppy Disk drive, an MO drive or a virtual drive on your network.
Page 2-32