Appendix; Optional Accessories - MICRO-EPSILON optoCONTROL 1200 Operating Instructions Manual

Appendix | Optional Accessories

Appendix

A 1
PC1200-x
PC1200/90-5
PS2020
IF1032/ETH
JU1200-HT
JU1200-HR
JU1200-VT
JU1200-VR
optoCONTROL 1200/1201

Optional Accessories

Supply and output cable, 5 m lang, cable length x = 5 or 10 m, with female connector
and stranded wire
Supply and output cable, 5 m lang, with right angle female connector and stranded wire
Power supply (Mounting on DIN-rail), output 24 VDC, input 240 VAC, switchable for
110 VAC
Interface module ME Ethernet/EtherCAT; multi-channel analog/Ethernet-EtherCAT con-
verter (-three analog inputs -one RS485) in addition with trigger
Adjustment plate ODC 12xx for horizontal mounting of ltransmitter (light source)
Adjustment plate ODC 12xx for horizontal mounting of receiver
Adjustment plate ODC 12xx for vertical mounting of transmitter (light source)
Adjustment plate ODC 12xx for vertical mounting of receiver
input, see A 2
Page 72