Supply Control Switch; Software Tools - Landis+Gyr E350 Series User Manual

20/56
2.9

Supply Control Switch

2.10

Software Tools

© Landis+Gyr
The ZxF100xB version of the E350 meter is equipped with a supply control
switch, which is controlled via the communication module. Various
functions can be implemented:

disconnection if credit has been used up

change to minimum power mode if credit has been used up

disconnection, if maximum power has been exceeded over a specified
time

others
The supply control switch can either be controlled via the communication
module or manually with the supply control switch button on the meter's
terminal cover (if parameterised accordingly, see also section 5.1.2 "Supply
Control Switch Button").
Landis+Gyr meters are provided with optimum support by suitable software
tools during all phases of their life cycle:

The Landis+Gyr .MAP110 service tool for customers is used for the
test and installation of meters and for servicing work on the spot.
For the list of functions of .MAP110, please see .MAP documentation and
the E350 Series 2 Functional Description.
D000027979 en t – E350 Series 2, 3-Phase ZxF100Ax/Cx – User Manual
Description of Unit