Table of Contents
Advertisement
28/96
Profile 1
Profile 2
Memory organisation
2.7.3
Event log
Memory organisation
Dedicated event log
Memory organisation
List of events
© Landis+Gyr
The first load profile is generally used for billing purposes. Its capture
period has a range of 1...60 min. This load profile may also contain
instantaneous values and detailed status information for data processing in
central stations.
The second load profile can be used to store instantaneous values over a
period which differs from the period of the first load profile. Apart from the
differing capture period, the second load profile is identical with the first
load profile.
The load profile is organised as a circular buffer, i.e. the oldest entry will be
overwritten by the most recent entry. The memory capacity which is
available for the load profile(s) depends on parameterisation. If both load
profiles are activated, they share the memory capacity which is allocated to
the load profile(s).
Events that occur sporadically are stored in the event log. The user may
select which events trigger an entry in the event log. The event log is used
to analyse the behaviour of the network as well as to supervise the correct
function of the meter.
In the event log, a maximum of 1000 event entries can be stored. The
individual entries consist of the time stamp and the event number.
Additional information such as the error register or energy total registers
can also be stored with every event.
The event log is organised as a circular buffer, i.e. the oldest entry will be
overwritten by the most recent entry.
Network quality events, can be stored in the dedicated event log. The
dedicated event log consists of three groups of logs.
Overvoltage events
Undervoltage events
Missing voltage events
In the dedicated event logs, important information can be stored per entry
such as:
duration of the events
extreme values of the events (not for missing voltage).
instantaneous values
maximum three energy registers
Additional information can be read from the header of the event logs, such
as the longest entry, the shortest entry, the total number of occurrence and
the total duration of the event.
The dedicated event logs are organised as circular buffers, i.e. the oldest
entry will be overwritten by the most recent entry.
The table below lists all events which can be captured in the event log.
Depending on the parameterisation, some events may never occur.
Events which can be stored in the dedicated event log are marked in the
corresponding column.
D000062026 en a – E650 Series 4 – ZMD400AT/CT, ZFD400AT/CT – User Manual
Device description
Advertisement
Table of Contents
