Operating Elements; Parameterization; Calling The Parameterization Function; Setting Of Parameters - Landis+Gyr ULTRAHEAT T450 Service Manual

Operating elements

2 Operating elements
3

Parameterization

3.1

Calling the parameterization function

3.2

Setting of parameters

Fig. 1: Operating elements
No. Name
1 Button 1
2 Button 2
3 Security seal
4 Screw
5 Optical interface
6 LCD
7 Service button
Note: The parameterization of the meter may have an impact on
the battery life.
Note: Alternatively, the meter can be parameterized in the
parametrization mode via the optical interface using UltraAssist.
Proceed as follows to parameterize the meter:
•
Press the service button for 3 seconds until the LCD displays
.
•
Press button 2 to adjust the parametrization.
To select a parameter, proceed as follows:
•
Press button 1 to advance the display.
•
Press button 2 to activate the parameter to be changed.
Description
Switches to the next display
value within a loop.
Switches to the next loop.
Permits data communication
via a computer with the
necessary service software.
To call up the
parametrization operation of
the meter.
7/25
Note
Accessible after
removing the cover.
© Landis+Gyr