Danfoss VLT MCD 600 Operating Manual page 89

VLT® Soft Starter MCD 600
Operating Guide
Table 44: 2-8 - Jog Torque
Range Function
* 50% 20–100%
The VLT® Soft Starter MCD 600 can jog the motor at a reduced speed, which allows precise positioning of
belts and flywheels. Jog can be used for either forward or reverse operation.
Set the current limit for jog operation.
Table 45: 2-9 - Stop Mode
Option
Coast To Stop
* TVR Soft Stop
Adaptive Control
DC Brake
Soft Brake
Table 46: 2-10 - Stop Time
Range
* 0 s 0:00–4:00 (mi-
nutes:seconds)
Table 47: 2-11 - Adaptive Stop Profile
Option
Early Deceleration
* Constant Deceleration
Late Deceleration
Table 48: 2-12 - Adaptive Control Gain
Range Function
* 75% 1–200% Adjusts the performance of adaptive control. This setting affects both starting and stopping control.
Table 49: 2-13 - Multi Pump
Option Function
Adjusts the performance of adaptive control to suit installations with multiple pumps connected to a com-
mon outlet manifold.
* Single Pump
Manifold Pump
Danfoss A/S © 2020.12
Function
Sets the time for soft stopping the motor using TVR or adaptive control. If a main contactor is instal-
led, the contactor must remain closed until the end of the stop time. Use the main contactor output
(13, 14) to control the main contactor.
Function
Selects which profile the VLT® Soft Starter MCD 600 uses for an adaptive control soft stop.
Function
Selects the stop mode.
AQ262141844215en-000401 / 175R1174 | 85
Programmable Parameters