Danfoss VLT MCD 600 Operating Manual page 111

VLT® Soft Starter MCD 600
Operating Guide
Option Function
Português
Français
Italiano
Russian
Table 162: 10-2 - Temperature Scale
Option Function
Selects whether the soft starter shows temperatures in degrees Celsius or Fahrenheit.
* Celsius
Fahrenheit
Table 163: 10-3 - Graph Timebase
Option
* 30 seconds
1 minute
30 minutes
1 hour
Table 164: 10-4 - Graph Maximum Adjustment
Range
* 400% 0–600%
Table 165: 10-5 - Graph Minimum Adjustment
Range
*0% 0–600%
Table 166: 10-6 - Current Calibration
Range Function
*100% 85–
Calibrates the soft starter's current monitoring circuits to match an external current metering device. Use the
115%
following formula to determine the necessary adjustment:
Calibration % =
Table 167: 10-7 - Adjustment Lock
Option Function
Selects whether the LCP allows parameters to be changed via the Main Menu.
* Read & Write Allows altering of parameter values in the Main Menu.
Danfoss A/S © 2020.12
Function
Sets the graph time scale.
The graph replaces the old data with new data progressively.
Function
Adjusts the upper limit of the performance graph.
Function
Adjusts the lower limit of the performance graph.
Current shown on soft starter display
Current measured by external device
Programmable Parameters
AQ262141844215en-000401 / 175R1174 | 107