Danfoss VLT MCD 600 Operating Manual page 116

VLT® Soft Starter MCD 600
Operating Guide
Table 186: 12-6 - Devicenet Baud Rate
Option Function
Selects the baud rate for DeviceNet communications.
* 125 kB
250 kB
500 kB
Table 187: 12-7 - PROFIBUS Address
Range Function
*1 1–125 Sets the PROFIBUS network address for the soft starter.
Table 188: 12-8 - Gateway Address
Range Function
st
*192 0–255
Sets the 1
12-11 and the default address is 192.168.0.100.
Table 189: 12-9 - Gateway Address 2
Range
*168 0–255
Table 190: 12-10 - Gateway Address 3
Range Function
*0 0–255 Sets the 3
Table 191: 12-11 - Gateway Address 4
Range Function
*100 0–255 Sets the 4
The network address can also be set via the Network Address options in Set-up Tools.
Table 192: 12-12 - IP Address
Range Function
st
*192 0–255 Sets the 1
parameter 12-12 to 12-15 and the default address is 192.168.0.2.
Table 193: 12-13 - IP Address 2
Range Function
*168 0–255 Sets the 2
112 | Danfoss A/S © 2020.12
component of the network gateway address. The gateway address is set using parameters 12-8 to
Function
nd
Sets the 2 component of the network gateway address.
rd
component of the network gateway address.
th
component of the network gateway address.
component of the soft starter's IP address for Ethernet communications. The IP address is set using
nd
component of the soft starter's IP address for Ethernet communications.
N O T I C E
Programmable Parameters
AQ262141844215en-000401 / 175R1174