Power Tilt Relay/Power Tilt Switch [Power Trim/Tilt Type Only] - Honda BF40D Manual

7. POWER TILT RELAY/POWER TILT SWITCH
[POWER TRIM/TILT TYPE ONLY]
a. REMOVAL/INSTALLATION
Remove the following parts.
- Engine cover (P. 4-2)
- Electric part cover (P. 18-19)
Install and route the connectors and harnesses in the proper positions (P. 2-68).
[2]
6 mm WASHER (2)
[1]
POWER TILT RELAY
B TERMINAL WIRE
INSTALLATION: P. 2-59
[9]
HARNESS CLIP
BRACKET A
18-21
6 x 18 (2)
[3]
POWER TILT RELAY
INSPECTION: P. 18-22
[8]
UNDER CASE
GROMMET G
700
[4]
WIRE HARNESS CLAMP
INSTALLATION: P. 2-68
6 x 12 (2)
[5]
POWER TILT
SWITCH STAY
[6]
POWER TILT RELAY
GROUND CABLE
INSTALLATION: P. 2-68
[7]
POWER TILT SWITCH
INSPECTION: P. 18-22