Honda BF40D Manual page 152

10) Set the fuel strainer stay on the cylinder head cover, and
tighten the two 6 x 14 mm flange bolts securely.
Install the fuel strainer (low pressure side) and the strainer
1
suspension as a set on the fuel strainer stay.
2
3
4
5
6
7
8
11) Insert the breather tube up to the base of the cylinder head
9
cover, and clamp with the tube clamp D17.
Install the main wire harness in the recess in the cylinder
head cover.
10
• Check that the fuel tube clamp A, that clamps the breather
11
tube B and the main wire harness, is set on the painted
part of the breather tube B securely (P. 2-83).
12
12) Install the following parts.
- Ignition coil/regulator/rectifier (P. 18-23)
13
- Alternator cover (P. 7-2)
- Engine cover (P. 4-2)
14
15
16
17
18
19
20
9-33
[2]
FUEL STRAINER STAY
6 x 14 (2)
[1]
FUEL STRAINER
(LOW PRESSURE
SIDE)
[1]
RECESS
[5]
MAIN
WIRE
HARNESS
[4]
TUBE CLAMP D17
152
[3]
STRAINER SUSPENSION
[2]
CYLINDER HEAD COVER
[3]
BREATHER TUBE