Power Trim/Tilt Switch - Honda BF75D Owner's Manual

Power Trim/Tilt Switch

Power Trim
Press the power trim/tilt switch on
the remote control lever to adjust the
−
motor trim angle of 4° to 16° to
maintain proper boat trim. The power
trim/tilt switch can be operated while
the boat is under way or while
stopped.
By using the power trim/tilt switch
the operator can change the trim
angle of the motor to achieve
maximum boat acceleration, speed,
stability and maintain optimum fuel
consumption.
The motor trim angle of
is the angle when the outboard motor
is installed on the boat at 12° .
(H type)
POWER TRIM/
TILT SWITCH
(R1 type)
POWER
TRIM/TILT
SWITCH
(R2 type)
−
4° to 16°
POWER TRIM/TILT SWITCH
CONTROLS AND FEATURES (Common)
POWER TRIM/TILT
SWITCH
REMOTE CONTROL
LEVER
REMOTE CONTROL LEVER
(R3 type)
(SINGLE TYPE)
(DUAL TYPE)
POWER TRIM/TILT SWITCH
(LEFT)
(RIGHT)
Excessive trim/tilt angle during
operation can cause the propeller
to raise out of the water and cause
propeller ventilation and engine
over-revving. Excessive trim/tilt
angle can also damage the water
pump.
REMOTE
CONTROL
LEVER
REMOTE
CONTROL
LEVER
35