Honda BF40D Manual page 284

16) Check the needle bearing for abnormal sound or play
before removing it. Replace the needle bearing with a new
one if necessary.
1
17) Set the special tools on the needle bearing and place a
2
shop towel or equivalent material under the needle bearing
as shown.
3
TOOLS:
Driver handle, 15 x 280 mm
4
Attachment, 24 x 26 mm
Pilot, 22 mm
5
6
7
8
9
10
11
12
18) Before removing the needle bearing, mark the special tool
13
at a point level to the gear case end using a straight edge
as shown.
14
• The mark on the special tool is used for installation of the
15
needle bearing. Do not erase the mark before installation.
16 TOOL:
Driver handle, 15 x 280 mm
17
19) Remove the 7/8 x 1-1/8 x 1 needle bearing from the gear
case using the special tool.
18
Replace the needle bearing with a new one on reassembly.
19 • Remove the needle bearing with care not to damage the
gear case.
20
11-32
[1]
DRIVER HANDLE,
15 x 280 mm
07949-3710001
07949-3710001
07746-0010700
07746-0041000
[6]
7/8 x 1-1/8 x 1
NEEDLE BEARING
[1]
DRIVER HANDLE,
15 x 280 mm
07949-3710001
07949-3710001
[4]
MARK
284
[2]
ATTACHMENT,
24 x 26 mm
07746-0010700
[3]
GEAR
CASE
[4]
PILOT, 22 mm
07746-0041000
[5]
SHOP TOWEL
[2]
GEAR CASE
[3]
STRAIGHT EDGE