Power Trim/I-Ilt Type Power Triflilt Switch - Honda Marine BF40A Owner's Manual

3. CONTROLS (POWER TRIM/TILT TYPE)
Power Trim/Tilt Switch
Power Trim
Press the power him/tilt switch on the
remote control lever (remote control type)
to adjust the motor trim angle of 0' to
20'
to maintain proper boat trim. The power
trim/tilt switch located on the remote
control lever (remote control type) can be
operated while the boat is under way or
while stopped.
By using the power trim/tilt switch the
operator can change the trim angle of the
motor to achieve maximum boat accel-
eration, speed, stability and maintain
optimum fuel consumption.
Power Tilt
Press the power trim/tilt switch on the
remote control lever (remote control type)
to adjust the motor tilt angle of 20' to 60".
By using the power trim/tilt switch the
operator can change the tilt angle of the
motor for shallow water operation,
beaching, launching from a trailer, or
mooring.
POWER TRItiILT
SWITCH
(remote control type)
\
On the tiller handle type, the power
trim/tilt switch is the optional part. The
power trim/tilt switch is available on
your authorized Honda Marine dealer.
I-
CONTROL
LEVER
-1 Excessive trimltilt angle
during operation can cause the propel-
ler to raise out
of
the water and cause
propeller ventilation and engine over-
revving. Excessive trimltilt angle can
also damage the water pump.
22