Fitting The Mounting Elements (Speed Measuring System) - HBM T10FS Mounting Instructions

Mechanical installation
34
5.8 Fitting the mounting elements (speed
measuring system)
Three mounting elements with screws are included with
the torque flange to prevent the speed sensor being
damaged during installation. The mounting elements hold
the rotor centrally in the antenna ring, making installation
easier and safer.
Important
The mounting elements are only an aid to installation and
must be removed before the initial operation of the torque
flange!
Fig. 5.8 Inserting the mounting elements
A0785-150 HBM: public
1
2
3
Mounting element
Fastening screw
T10FS