HBM T10FS Mounting Instructions page 31

Support supplied by the
customer, e.g. threaded
rod
T10FS
3. Clamp a suitable support element (we recommend a
threaded rod
∅ 3...6 mm) between the upper and lower parts of the
clamp fixture and tighten the clamping screws.
Antenna segments
Fig. 5.6 Installing the clamp fixture
Notice
Use, e.g. plastic as the material. Do not use metallic
material as this can affect the function of the antenna
(signal transmission).
A0785-150 HBM: public
Mechanical installation
Clamp fixture
Fan‐type lock washers
31