HBM T10FS Mounting Instructions page 7

T10FS
Fig. 1.1 Location of the label on the stator of the device
The preferred position of the FCC label is on the type
plate. If this is not possible for reasons of space, the
label can be found on the rear of the stator housing.
Model: T10S2
FCC ID: 2ADAT-T10S2TOS6
IC: 12438A­T10S2TOS6
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause unde­
sired operation.
Label example with FCC ID and IC number
Industry Canada IC
This device complies with Industry Canada standard
RSS210.
This device complies with Industry Canada license-ex­
empt RSS standard(s). Operation is subject to the follow­
ing two conditions: (1) this device may not cause interfer­
ence, and (2) this device must accept any interference,
including interference that may cause undesired opera­
tion of the device.
A0785-150 HBM: public
Safety instructions
7