HBM T10FS Mounting Instructions page 9

Safety instructions
Everyone involved with mounting, starting up,
maintaining, or repairing the transducer must have read
and understood the Operating Manual and in particular
the technical safety instructions.
Residual dangers
The scope of supply and performance of the transducer
covers only a small area of torque measurement
technology. In addition, equipment planners, installers
and operators should plan, implement and respond to the
safety engineering considerations of torque
measurement technology in such a way as to minimize
remaining dangers. On‐site regulations must be complied
with at all times. Reference must be made to remaining
dangers connected with torque measurement technology.
Conversions and modifications
The transducer must not be modified from the design or
safety engineering point of view except with our express
agreement. Any modification shall exclude all liability on
our part for any damage resulting therefrom.
Qualified personnel
The transducer must only be installed and used by
qualified personnel, strictly in accordance with the
specifications and with safety requirements and
regulations. It is also essential to comply with the legal
and safety requirements for the application concerned
during use. The same applies to the use of accessories.
Qualified personnel means persons entrusted with siting,
mounting, starting up and operating the product who
possess the appropriate qualifications for their function.
T10FS 9
A0785-150 HBM: public