HBM T10FS Mounting Instructions page 96

Specifications
Nominal (rated) torque M
Hysteresis of reversal in the case of
relative vibrations between the rotor and
the stator
Torsional vibration of the rotor
Radial vibration amplitude of the
stator
Load resistance
Magnetic loading limit
Remanent flux density
Coercive field strength
Permissible magnetic field strength
for signal deviations per pole of < 0.1
degree
Radial nominal distance between
sensor head and magnetic ring
Actuation distance range
Max. permissible radial shift of the
rotor to the stator
4)
When changing to higher output pulse factors, note the maximum possible output frequency of
250 kHz.
5)
Max. permissible rotation speed for speed measurement is 20500 min-1. At higher speeds, less
output pulses must be set.
6)
RS-422 complementary signals
7)
Can be switched off
96
N⋅m
nom
7
Deg.
mm
kΩ
mT
kA/m
kA/m
mm
mm
mm
A0785-150 HBM: public
100 200
<approx. 1
<approx. 1
w2 (note termination resistances as
per RS-422)
>100
>100
<0.1
1.0
0.3 ... 1.8
See actuation distance range; can
be readjusted at the sensor head by
±1.5 mm.
500 1 k
T10FS