Vibration Suppression (Hysteresis) - HBM T10FS Mounting Instructions

Settings
Radial stator vibrations, approx.
Torsional rotor vibrations, approx.
70
8.6

Vibration suppression (hysteresis)

Low rotation speeds and higher relative vibrations
between the rotor and the stator can cause disturbance
signals that reverse the direction of rotation. Electronic
suppression (hysteresis) to eliminate these disturbances
is connected at the factory. Disturbances caused by the
radial stator vibration amplitude and by the torsional
vibration of the rotor are suppressed.
Switch S5
Fig. 8.10 Switch for switching off hysteresis
A0785-150 HBM: public
Speed measuring system
magnetic
mm 1
Deg. 1
optical
2
2
Hysteresis
Off On
S5
T10FS