HBM T10FS Mounting Instructions page 10

Safety instructions
10
Accident prevention
According to the prevailing accident prevention
regulations, once the torque flange has been mounted, a
covering agent or cladding has to be fitted as follows:
S The cover or cladding must not be free to rotate.
S The cover or cladding should avoid squeezing or
shearing and provide protection against parts that
might come loose.
S Covers and cladding must be positioned at a suitable
distance or be arranged so that there is no access to
any moving parts within.
S Covers and cladding must also be attached if the
moving parts of the torque flange are installed outside
peoples' movement and operating range.
The only permitted exceptions to the above requirements
are if the various parts and assemblies of the machine
are already fully protected by the design of the machine
or by existing safety precautions.
Warranty
In the case of complaints, a warranty can only be given if
the torque flange is returned in the original packaging.
A0785-150 HBM: public
T10FS