Section 1 – Scheduled Maintenance
1.6-8 Platform Assembly
Railings and gates
1
2
Make sure there are no loose or missing parts,
▪
and there is no visible damage.
Make sure the fasteners are correctly installed.
▪
Make sure the platform railings
▪
correct position.
Make sure the gates or drop bars
▪
good condition and operate correctly.
MEWP floor
3
Make sure the MEWP floor is solid and there is
▪
no visible damage.
Footswitch
4
Make sure the footswitch is in good working
▪
order and has not been tampered with,
disabled or blocked.
Fall-protection anchorages
5
Make sure that the fall-protection anchorages
▪
are correctly installed.
Make sure there is no visible damage.
▪
AC power socket
6
Make sure that the socket is free of dirt or
▪
blockages.
229040ABA
26
6
4
are in the
1
are in
2
5
2
3
4
7
9
Platform control console
7
Make sure all switches and controllers are in
▪
the neutral position.
Make sure there are no loose or missing parts,
▪
and there is no visible damage.
Manual storage box
8
Make sure that the operation manual and
▪
other important documents are in the manual
storage box.
Make sure that the documents are in good
▪
condition, and you can read them.
Always put the manuals and other documents
▪
back in the storage box after use.
Load Cell - CE & AS
9
Make sure there are no loose or missing parts,
▪
and there is no visible damage.
Make sure the fasteners are correctly installed.
▪
Make sure the cables are in good condition.
▪
Make sure the cable connections are tight.
▪
Make sure there is no debris lodged between
▪
the platform and the boom adaptor.
Scheduled Maintenance Inspections
1
(B)
(B)
(B)
SJ82 T, SJ86 T