Table of Contents
Advertisement
Section 5 – Procedures
5.9-4 Check the Oil Level in the Axle
Gearbox
1. Remove the fill plug
2. Check the oil level. It should be even with the
bottom of the fill plug hole. Add oil if needed.
Refer to
2.10 Hydraulic Specifications & Gear
for oil specifications.
229040ABA
252
from the gear box.
1
Fill
5.9-5 Change the Oil in the Axle Gearbox
1. Place a suitable container under the gearbox.
2. Remove the fill plug.
3. Remove the drain plug to allow oil to drain into
the container.
Oil.
4. Reinstall the drain plug.
NOTE
The gearbox is full when oil is leaking from the
check port.
5. Refill the gearbox with new oil as per
specifications. Refer to
Specifications & Gear Oil.
6. Reinstall the fill plug.
Drain
2.10 Hydraulic
Axles
Fill
SJ82 T, SJ86 T
Advertisement
Table of Contents
