Table of Contents
Advertisement
Turret
5.5-3 Check the Swing Drive Oil
1. Remove the plug from the fill port
back of the swing drive.
2. Check the oil level. The oil level should be
slightly below the port threads.
3. Add oil if needed. Refer to
Specifications & Gear Oil
types.
1
SJ82 T, SJ86 T
on the
1
2.10 Hydraulic
for recommended oil
5.5-4 Change the Swing Drive Oil
NOTE
The oil change must be performed on a flat, level
surface.
1. Remove the plug from the fill port
2. Place a suitable container under the drain
port
.
2
2
3. Remove the plug from the drain port.
4. Allow the oil to drain.
5. Reinstall the drain plug.
6. Refill the swing drive with approximately 32 oz
(1 L) of oil (refer to
& Gear Oil
for recommended oil types).
7. Reinstall the plug at the fill port.
Section 5 – Procedures
.
1
1
2.10 Hydraulic Specifications
229040ABA
213
Advertisement
Table of Contents
