Overview - Victaulic VicFlex I-VICFLEX Field Installation Handbook

OVERVIEW

Victaulic VicFlex
® ™
stakeholders require an additional means of deterring unauthorized personnel from
performing work on an existing sprinkler system. In addition, these warning labels are
applied on every bracket assembly as required by NFPA 13 and can also be applied as
tamper-evident labels.
This label may be applied to both of the AB7, AB1, AB2, or AB10 end brackets, as
required by the building stakeholders, after the sprinkler system has been completed. A
broken or tampered seal is an indication that the VicFlex
its intended location.
Additional copies of these labels are available through your Victaulic
or through the Victaulic
with the bracket for complete product installation requirements.
Failure to follow these instructions could result in death or serious personal injury
and property damage.
TAMPER-EVIDENT LABEL FOR THE STYLE AB7 END BRACKET
TAMPER-EVIDENT LABEL FOR THE STYLE AB1, AB2, OR AB10
• Relocation of this VicFlex™ product SHALL be performed by quali ed personnel
familiar with the system's original design criteria, sprinkler listings/approvals, and
state and local codes (including NFPA 13 standards). DO NOT REMOVE THIS LABEL.
Failure to relocate this VicFlex™ product properly could a ect its performance during a
re, resulting in death or serious personal injury and property damage.
I-VICFLEX_152
tamper-evident labels are available for applications where the building
website, victaulic.com. Always refer to the instructions supplied
®
END BRACKET
™
WARNING
• Read and understand all instruc-
tions before attempting to install any
Victaulic products.aintenance of any
Victaulic products.
• Wear safety glasses, hardhat, and
foot protection.
• The installer shall understand com-
mon industry safety standards and
potential consequences of improper
product installation.
VICFLEX TAMPER EVIDENT LABELS
product has been moved from
sales representative
®
9295 Rev. B
Z109295LBL
REV_A