Victaulic VicFlex I-VICFLEX Field Installation Handbook page 123

6. Anchor the bracket in the desired location on the wood or metal joist/stud by using
two #10 x 1 1/2-inch long wood screws (for wood joists/studs shown above) or two #10
x 1 1/2-inch long sheet metal screws (for metal joists/studs). NOTE: Victaulic
does not
®
supply wood screws or sheet metal screws.
NOTICE
• Always reference page 119 of this manual for Style VS1 Sprinkler Assembly
pitching requirements.
STYLE VS1 DRY SPRINKLER INSTALLATION FOR
FIRE PROTECTION SERVICE REV_A I-VICFLEX_123