Victaulic VicFlex I-VICFLEX Field Installation Handbook page 108

• Adhesives are extremely flammable materials and shall be kept away from open
flames or other ignition sources.
• Proper ventilation shall be maintained throughout the following installation
steps, since vapors are harmful and flammable.
• Consult with the specific adhesive manufacturer for additional technical and
safety information.
Failure to follow these instructions could result in death or serious personal injury
and property damage.
I-VICFLEX_108
FOR FRP DUCTS ONLY: Use a disc
sander to prepare a 6 x 6-inch/
152 x 152-mm area around the hole cut
into the duct in Step 1. This area shall
be sanded until the surface is rough to
ensure a proper bond with the mounting
block. Remove sanding dust with a clean,
dry cloth.
2. Using sandpaper, sand the mating
surface of the mounting block until the
surface is rough. The surface shall be
rough to ensure a proper bond with the
duct. Remove sanding dust.
WARNING
STYLE AQD BRACKET INSTALLATION FOR
ROUND OR SQUARE METAL OR FRP DUCTS
REV_A