Table of Contents
Advertisement
Strip Chart Recorder Option
17.2. Recorder Settings
If after pressing the SETUP key, you select the "Recorder" item, the Setup
Recorder menu will appear.
Figure 70. Setup Recorder Menu
The Waveform 1 setting controls which waveform is shown in the top channel of
the strip chart recordings. The Waveform 2 setting controls which waveform is
shown in the bottom channel of the strip chart recordings. If this setting value is
Off, or if it is set to ECG2 but only one ECG waveform is selected for display, the
strip chart recording will have only one waveform.
The Recording Time setting controls the amount of time represented on strip chart
recordings. The Recording Delay setting controls how much of the printed strip
represents time prior to the event that initiated the recording, whether a key press
or an alarm.
17-2
N i g h t i n g a l e P P M 3 U s e r ' s G u i d e
April 2019
Advertisement
Table of Contents
